Finish: Flat/Matte

Solvent: Water

Binder Type: Vinyl Acrylic

Dilution: May be used straight out of the can or diluted with water, Rosco Clear Acrylic Glaze or a combination of the two. Diluting will reduce the color concentration and create "glaze" effects. Diluting with more than 2 parts water may reduce binder strength. Add Rosco Clear Acrylic Glaze to restore adhesion and flexibility.

Surface Preparation: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabric, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a final preparation.

Application: Stir contents well before each use. Do not shake. Apply by brush, roller or spray gun. Apply in thin, even coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.

Film Thickness: 2 mil. Dry Film.

Coverage: Approximately 300 sq. ft. per gallon (28 sq. m per 3.79L), depending on substrate, application tool and film thickness.

Avg. Dry Time: At 75°F (24°C), dries to the touch in approximately 30-45 minutes. Can be recoated in 1-2 hours.

Clean-up: Soap and water.

Shelf Life: Minimum shelf life for unopened, sealed paint is approximately 24 months when stored in a temperature controlled location.

Packaging: Quart (0.946L), 1 Gallon (3.79L). *5 Gallon (18.95L) available.